Other

The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - 17mm diameter for easy seat post installation - Battery charges through the Interface Unit - Compatible only with the Super Record/Record V3 Power Unit

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs

Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin

Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit

- Required for charging Campagnolo V2 and V3 Power Units - Not compatible with Campagnolo V1 Power Unit

The EPS Power Unit is the brain of the entire EPS system. The power unit input/output gate charges the battery and updates the firmware. The unit checks and manages the battery pack, interacts with the interface, drives the front and rear derailleurs, and displays system anomalies through an acoustic buzzer and RGD light. EPS V2 Power Units are for internal battery applications, under bottom bracket, or under chain stay mounting options and require the specific EPS V2 Interface. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1 meter for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F

- EPS under-seat shifter cable kit

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - New shape with LED indicators on 3 sides - Battery charges through the Interface Unit, no more need to drill a charging port hole in the bicycle frame - Contains a wireless module allowing for connection to PCs, smartphones, tablets, etc., through ANT+ and Bluetooth Low Energy (BLE). Requires the use of Android 4.3 or newer, or iOS 8 or newer - Only compatible with Campagnolo Super Record and Record V3 Power Unit - Waterproof to 1m for 30 minutes (IP67 Rated) - Weathertight, o-ring sealed connectors - See PDF for complete details on the V3 app and customization

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Not compatible with the V3 Power Unit - Required for external mounting of V2 Power Unit

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated) - Compatible only with the Chorus Power Unit

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit