The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)
- Men's Premium EPS Winter Liner w/ Boa Adjuster - For Watts, Baker, Macon - Old version Double-sizing: S/M (54-57cm), L/XL (57-60.5cm), 2XL-3XL (60.5-63.5cm) - New vesion Single sizing: S (54-55.5cm), M (55.5-57cm), L (57-59cm), XL (59-60.5cm)
A coffee or beer after a long ride is the perfect way to relax and discuss your performance or the events of that day with your buddies. But where do you leave that helmet?! You can lay it on the table, hang it on your bike, or even keep it on your head, but none of those solutions are really ideal. And how do you secure your bike without carrying a lock at all times? You want to store your helmet somewhere and not have to look over your shoulder every five minutes to check if your bike is still there. Wouldn’t it be great if there was a way to store your helmet and lock your valuable bicycle safely at the same time?! That problem is now solved with the arrival of the Cappuccinolock. The Cappuccinolock is a revolutionary way to secure your helmet using only your helmet straps. Slide the male part of your buckle into the lock on one side and connect the female part of your buckle on the other side of the lock. Twist the numbers to ensure the lock can’t open and relax while you have your coffee. Use it to lock your helmet to prevent it from getting stolen or use the helmet straps to secure your helmet and your bicycle at the same time. Lock it, roll it, leave it!
- Includes replacement Rollsys LED assembly only
Lazer Rollsys LED Upgrade Kit - Includes a Rollsys cap, batteries, LED assembly, and instructions
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
Replacement visor for all Specialized Centro helmets.
$34.93 $55.95 38% Savings
- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to back pack
$34.93 $55.95 38% Savings
- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to backpack
No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
Lose your kid's Baby Nutty Helmet pads? Or did they just get a little too much loving? Replacement pad sets for your Baby Nutty helmet. Each set comes with two of: - 3mm pads (front and rear) - 6mm pads (front and rear) - 6mm crown pad
Keep your ears nice and toasty. Nutcase's removable ear pads provide comfort and warmth on those brisk and chilly rides. Compatible with Nutcase Street (Bike & Skate) and Little Nutty lines only. Not compatible with Metroride, Baby Nutty, Moto, Snow, or Water.
Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation
Replacement visor for all Andorra helmets.
Ponytail-ready HairPort SL II fit system with six height positions and micro-adjustable dial for optimized fit. - Helmet not included, sold separately
Mindset 360 fit system provides a secure, customizable fit with 360-degree tension adjustment, five height positions, and an integrated dial for easy, on-the-fly adjustments. - Helmet not included, sold separately
If you've traveled with your bike equipment before, you've surely finished packing a bag, only to be left wondering, "where is this helmet going to go?" Show your helmet that you love it with Specialized's S-Works TT Helmet Soft Case. It's durable and zips shut, making it a safe, easy way to transport your helmet.
- Replacement visor for all Chamonix helmets for model year 2014 to present. - One Size
EVA Molded Soft Case protects your helmet during storage and transport. Designed specifically to fit the TT2 helmet. - Durable EVA Construction - Heavy duty zipper closure - Adjustable carrying handle - Helmet sold separately
Replacement pads for all Deviant II helmets.
Replacement fit system assembly for Echelon, Echelon II, Propero II, Tactic, Tactic II with mushroom-plug snap attachment (verses the new 5-position adjustable attachment).
Replacement visor for all Specialized Duet helmets.
Replacement pads for all Ambush Comp helmets.
Replacement visor for all Propero 3 helmets.
Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts
Replacement visor for all Ambush Comp helmets.
Page 1 of 2 Next page